Easy Playback; Power On Link; Power Off Link; Standby Power Save - Panasonic TX-P42ST60E User Manual

Easy playback

Automatic input switching - When the connected equipment is operating, the
input mode is switched automatically.

Power on Link

Set Power on Link to
Settings
When the connected equipment starts playback or direct navigator / function
menu for the equipment is activated, the TV is automatically turned on. (Only
when the TV is in Standby mode.)

Power off Link

Set Power off Link to
Settings
When the TV is set to Standby mode, the connected equipment is also
automatically set to Standby.
This function will work even if the TV enters Standby mode automatically
●
by auto power standby function.

Standby Power Save

Set Standby Power Save
Settings
The power consumption of the connected equipment in Standby mode is
controlled higher or lower in synchronisation with the TV on / off state to
reduce the consumption.
When the TV is set to Standby mode, the connected equipment is
automatically set to Standby and the power consumption of the connected
equipment is automatically minimised.
When the TV is turned on, the connected equipment is still in Standby mode,
but the power consumption is increased to start the connected equipment
fast.
This function is effective if the connected equipment can change the power
●
consumption in Standby mode and is set to higher consumption.
This function works when
●
On in the Setup Menu to use this function.
Setup VIERA Link Settings
On in the Setup Menu to use this function.
Setup VIERA Link Settings
to On in the Setup Menu to use this function.
Setup VIERA Link Settings
Power off Link
- 122 -
is set to On.