Auto Power Standby Function - Panasonic Viera TX-P42S21B Operating Instructions Manual

TV
Function select
●
Volume / Contrast / Brightness / Colour /
Common
Sharpness / Tint (NTSC signal) / Bass ("Music"
Interface
F
or "Speech" mode in the Sound Menu) / Treble
("Music" or "Speech" mode in the Sound Menu) /
Balance / Auto Setup (p. 36 and p. 37)
TV
Changes the input mode
AV
CI slot
(p. 48)
SD Card slot
(p. 52)
HDMI3 terminal
HDMI 3
Headphones jack
AV 3
V
L
AV3 terminals
R
Mains power On / Off switch
●
Use to switch the mains power.
If you turned the TV Off during Standby mode by the remote control last time, the TV
will be in Standby mode when you turn the TV On with Mains power On / Off switch.
Using the On Screen Displays
Many features available on this TV can be accessed via the On Screen Display menu.
■
How to use remote control
MENU
Open the main menu
Move the cursor / select the menu item
Access the menu / store settings after
adjustments have been made or options
have been set
■
ON SCREEN HELP Instructions box - Operation guide
Example (Owner ID):
Owner ID
Please enter new PIN
PIN *
EXIT
PIN entry
0 9
RETURN
■

Auto power standby function

●
The TV will automatically go to Standby mode in the following conditions:
• no signal is received and no operation is performed for 30 minutes in Analogue TV mode
• "Off Timer" is active in the Setup Menu (p. 17)
• no operation is performed for the period selected in "Auto Standby" (p. 32)
●
This function does not affect Ext Rec. of Timer Programming and Direct TV Recording.
Increases or decreases the channel position by one.
When a function is already displayed, press to increase or decrease
the selected function.
When in Standby mode, switches TV On (Press for about 1 second).
(p. 63)
(p. 63)
(p. 63)
* * *
Operation guide will help you.
Remote control signal receiver
●
Do not place any objects between the TV remote control signal
receiver and remote control.
C.A.T.S. (Contrast Automatic Tracking System) sensor
●
Senses brightness to adjust picture quality when "C.A.T.S."
in the Picture Menu is set to "On" (p. 28)
Power and Timer LED
●
Red : Standby
Green: On
Orange: Timer Programming On
Orange (flash): Ext Rec. of Timer Programming or
Red with orange flash: Standby with Timer Programming
●
The LED blinks when the TV receives a command from
the remote control.
EXIT
Exit the menu system and return to the
normal viewing screen
Move the cursor / adjust levels / select from
a range of options
RETURN
Return to the previous menu
Direct TV Recording in progress
On or Direct TV Recording
9