Troubleshooting - Panasonic VIERA TX-26LXD6 Operating Instructions Manual

TROUBLESHOOTING

Picture
Snowy
Picture
Multiple
Images
Interference
Normal
Picture
No Picture
No Colour
Poor or
Distorted
Picture
There may
be red spots,
blue spots
and green
spots on the
screen.
Normal
Picture
(Snow noise, no picture, picture runs etc)
The error message appears
Symptoms
Sound
Poor Video
Poor Audio
Noisy
Aerial location, direction or connection.
Sound
Normal
Aerial location, direction or connection
Sound
Electrical appliances
Cars / Motorcycles
Noisy
Sound
Switch on P---NR in Picture menu to reduce picture
noise
Volume level
No Sound
Sound mute switched on
TV set to AV mode
Not plugged into A.C. outlet
No Sound Not switched on
Picture / Sound controls set at minimum levels
Check if in standby mode
Normal
Colour controls set at minimum levels
Sound
Weak or
Retune Channel(s)
No Sound
This is a characteristic of liquid crystal panels and is not
a problem. The liquid crystal panel is built with very
high precision technology giving you fine picture
Normal
details. Occasionally, a few non ---active pixels may
Sound
appear on the screen as a fixed point of blue, green, or
red. Please note this does not affect the performance of
your LCD.
Weak or Sound reception may have deteriorated.
distorted Switch NICAM setting (Sound menu) to Off until
sound
reception improves.
HDMI cable is not connected securely.Turn the power
supply of the TV and connected equipment off then
turn back on. Check compatibility of input signal from
the
connected equipment. The connected equipment
must be EIA/CEA ---861/861B compliant
Change the audio setting of the connected equipment
to L PCM. Check the setting of HDMI input in Sound
menu. If the problem is due to the digital audio con-
nection, change to the analogue audio connection
Please consult an Authorised dealer
Checks Checks
49