Aspect Controls - Panasonic TX-26LXD52 Operating Instructions Manual

Aspect Controls

The Widescreen TV will allow you to enjoy viewing the picture at its optimum size and aspect,
including widescreen cinema format pictures.
Press the ASPECT button repeatedly to move through the aspect options.
Press the ASPECT button. Whilst the on screen selector keys are displayed,
use the Red or Green buttons to move in either direction through the aspect
options.
Signal name
Panasonic Auto
PAL I
PAL 525/60
DVB
M.NTSC
NTSC
(AV input only)
525(480)/60i
525(480)/60p
625(576)/50i
625(576)/50p
750(720)/50p
750(720)/60p
1125(1080)/50i
1125(1080)/60i
Panasonic Auto
Panasonic Auto determines the best aspect ratio to use to fill your screen.
It does this using a four step process to determine if the picture being viewed
is a widescreen picture.
If Panasonic Auto detects a widescreen signal it switches into the appropriate
widescreen mode. If Panasonic Auto does not detect a widescreen signal
then this advanced TV set enhances the picture for optimum viewing pleasure.
The text shown on the screen indicates how Panasonic Auto determined
which ratio to use:
Panasonic Auto switches to the appropriate widescreen ratio.
If black stripes above and below the picture are detected, aspect ratio changes
automatically.
Panasonic Auto chooses the best ratio and expands the picture to fill the
screen. This process can take several minutes, depending on the darkness
of the picture.
You may prefer to manually select one of the other aspect options available
to view the picture.
Notes:
• If, in Panasonic Auto mode, you experience problems with the screen display
size when playing back widescreen format recordings from your VCR then
it is possible that the tracking control of your VCR requires adjustment (your
VCR instruction book will contain adjustment details).
• The widescreen aspect ratios of different films and programmes can vary.
If these are wider than a standard 16:9 aspect picture then a black band
may be visible at the top and bottom of the screen.
• "WIDE" will appear in the top left corner of the screen and picture aspect
changes accordingly in any aspect modes, if a widescreen identification
signal (WSS) is detected or a control signal is found through a Scart terminal.
• Automatic aspect ratio adjustment by WSS signal is not available for
progressive and high definition component signals input.
OR
Aspect modes
16:9 14:9 4:3 Zoom1 Zoom2 Zoom3 TV AV1 AV2 AV3 AV4 Component TV AV1 AV2 AV3 AV4
ASPECT
Red Green
Aspect Control Signal
Control signal through
WSS
SCART terminal (pin 8)
WIDE
"WIDE" appears in the top left of
the screen, Panasonic Auto
switches to the appropriate 16:9
or 14:9 widescreen ratio.
Panasonic Auto
"Panasonic Auto" appears in the
top left of the screen. The best
ratio is chosen and the picture
expanded to fill the screen.
Panasonic Auto
Press the ASPECT button, then
use the Red or Green buttons to
move in either direction through
the aspect options.
1 2 3
4 5 6
7 8 9
C 0
N
33