Cassette Tapes — Play And Recording - Panasonic SC-VK950 Operating Instructions Manual

Cassette tapes — Play and Recording
u, i,
2/REW, FF/1
CANCEL
g, STOP
You can use either deck 1 or deck 2 for tape playback.
Use normal position tapes.
High position and metal position tapes can be played, but the
unit is not able to do full justice to the characteristics of these
tapes.
• Tape playback is momentarily interrupted if you open the
other deck.
• Tapes exceeding 100 minutes are thin and can break or get
caught in the mechanism.
• Tape slack can get caught up in the mechanism and should
be wound up before the tape is played.
• Endless tapes can get caught up in the deck's moving parts
if used incorrectly. Use tapes appropriate to this unit's auto-
reverse mechanism.
1
Press [TAPE w q]
The unit comes on. If a cassette was loaded, play starts
automatically (One touch play).
2
Press deck 1 [
the main unit and insert the cassette.
Exposed tape facing down.
Close the holder by hand.
3
Start play.
Every time you press the button:
F q : Forward side is played
R : Reverse side is played.
w
24
24
TAPE w q
DVD/CD q
PLAY MODE
OPEN] or deck 2 [OPEN
;
Side to be played facing towards you.
AC IN
SURROUND
ENHANCER
SUPER SURROUND
SUPER SOUND EQ
SOUND EQ
SUBWOOFER
MUSIC PORT
MUSIC PORT
PHONES
DISPLAY
DEMO
Deck 1
OPEN
; OPEN
DECK 1/2
*, RECORD
Play
Stop
Reverse mode
selection
To select
] on
between
;
loaded decks
Fast-forward
and rewind
OPEN/CLOSE
MULTI CHANGE
SINGLE CHANGE
TUNER TAPE DVD/CD
DECK 1/2 RECORD REW/ STOP /FF
Every time you press and hold the button:
v / $
One side is played.
v
Both sides are played (forward
/
reverse).
Both sides are played repeatedly
$
until [g, STOP] is pressed.
To listen to 2 tapes consecutively, load
a tape into each deck and select "$".
Both tapes will be played repeatedly until
[g, STOP] is pressed.
(main unit: [DECK 1/2]).
1
2
3
4
5
MIC VOL
MIC 1
w q, TAPE
q, DVD/CD
MIC 2
Deck 2
OPEN
OPEN ;
i, 1/FF
g, STOP
u, REW/2