Heating Operation
PQRCUCA0
Defrost
Preheat
Out door
FAN
MODE
SPEED
What is the three-minute delay function?
It will take time for the product to blow warm air. The delay is to protect the compressor. The
room will be heated with warm air after three minutes when the compressor begins operation.
I The cooling-only model will not do heating function.
1
2
Room Temp
Total on
Central Run
* If the desired temperature is set lower than the current
3
4
How to use the Mode Selection Button
If you want to set the heating operation, press the
On/Off button. And press the mode button.
❈ Plasma function is always operating for working if
product has plasma function.
Set the desired room temperature higher than the
current room temperature. (64~86°F)
A click of the button will increase the desired temperature by 2°F.
A click of the button will decrease the desired temperature by 2°F.
room temperature, the heating function will not begin.
If you press the mode button during the operation, the
operation mode will be changed in the order of cooling,
heating, dry(dehumidification), fan and auto-operation.
If you press On/Off button again, the heating operation
will stop.
Owner's Manual 13