On-Screen Display (Osd); Vcr Status & Clock Display; Blue Screen Display - Panasonic Omnivision PV-C911 Operating Instructions Manual

On-Screen Display (OSD)

VCR Status & Clock Display
Press DISPLAY
to display or remove the overlay.
Rec Time Remaining
(OTR mode only, see
page 14.)

Blue Screen Display

Whenever a blank section of a tape comes
up in Play mode, or when the selected
channel has no broadcast signal with the
Weak Signal Display set to "OFF" (see
page 32), the screen will turn solid blue.
Channel & Function Display
When a function button is pressed (PLAY,
FF, etc.) or you change channels, the unit
mode or channel number will be displayed.
(Some station names may also appear if
Channel Caption is set. See pages 30, 31.)
0 8
ABC
PLAY
38
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Channel Caption
(See pages 30, 31.)
Function Status
Current Time
ABC
REC 1 2 : 0 0PM
-0 : 1 2 : 3 4
0 : 25
SP
12 / 18 / 2001 TUE
12 : 0 0PM - 1 : 0 0PM
CH 0 8 ABC MOV I E
Time Stamp Data (See page 33.)
Dew Detection System
To prevent damage to your tapes, this unit
is equipped with a dew detection system.
When moisture condensation is detected
inside the unit, "DEW" will appear
on-screen for a few seconds. If a tape is
inserted, it will be ejected.
Also, VCR functions will be non-operational
until dew condition passes.
Press DISPLAY to see if dew condition still
exists. In order to avoid this condition, try
not to move the unit directly from a cold
place to a warm place. TV functions are
not affected.
DEW
Counter
Tape Speed