Table of Contents
Advertisement
Function
Colour night view
Self-timer
Built-in flash
66
VQT1Z27
This function allows you to record colour images in very low
light situations. (Minimum required illumination: approx. 1 lx)
This is for recording still pictures using the timer.
Each time the
icon is selected, the indication changes by one
setting in the following order:
Ø10 # Ø2 # setting cancelled
Ø10:
Records after 10 seconds
Records after 2 seconds
Ø2:
≥ In motion picture recording mode, set this function from the menu.
≥ When the
button is pressed, a still picture is recorded after
the Ø10 or Ø2 display and the recording lamp flashes for the
time which has been set.
≥ After recording, the self-timer is cancelled.
≥ In auto focus mode, if the
and then fully, the lens focuses on the subject when the button
is pressed halfway.
≥ If the
button is pressed fully all at once, the lens focuses
on the subject just before recording.
To stop the timer midway through
Press the MENU button.
When the
button is pressed, the flash is activated and
the picture will be recorded. Use the built-in flash in order to
record still pictures in dark places.
Each time the ß icon is selected, the indication changes by one
setting in the following order:
ß # ßA #
ON
ß:
ßA:
AUTO
:
OFF
≥ In motion picture recording mode, set this function from the menu.
≥ This function's default setting is ßA.
≥ When the
button is pressed halfway, the flash indicator will
appear.
≥ The unit automatically determines if the flash is necessary
even when it has been set to
brightness. (If it determines that the flash is necessary, the
indication lights up in red when the
halfway.)
∫ To adjust the brightness of the flash
≥ The intelligent auto mode is set to off in motion picture
recording mode. (l 45)
Select the menu. (l 31)
[PICTURE] # [FLASH LEVEL] # desired setting
[ßj]:
Less brighter
[ßd0]: Normal
[ßi]:
Much brighter
Effect
button is pressed halfway once
by detecting the ambient
button is pressed
Advertisement
Table of Contents
