Recording Settings - LG RCT699H Owner's Manual

Recording Settings

Rec Mode Set
You can set the picture quality for recording; XP
(High Quality), SP (Standard Quality), LP (Low
Quality), EP (Extend Quality), MLP (Maximum Long
Play)
1. Select the [Rec Mode Set] option then press d.
2. Use s/w to select a desired Rec Mode Set (XP,
SP, LP, EP or MLP).
[XP] – Highest quality setting, gives about 1
hour of recording time on a DVD (4.7GB).
[SP] – Default quality, sufficient for most
applications, gives about 2 hours of recording
time on a DVD (4.7GB).
[LP] – Slightly lower video quality, gives about
4 hours of recording time on a DVD disc
(4.7GB).
[EP] – Low video quality, gives about 6 hours of
recording time on a DVD (4.7GB).
[MLP] – The longest recording time with the
lowest video quality, gives you about 14 hours
of recording time on a DVD (4.7GB).
,
Note
You may see a fragmented picture or distorted
subtitle during playing back the contents
recorded in EP and MLP mode.
Rec Aspect
When recording, you can set the recording aspect
ratio to suit the material you're recording (16:9 or
4:3).
,
Note
When DVD recording, you can set the
recording aspect ratio to suit the material
you're recording (16:9 or 4:3).
DV Rec Audio
You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel
DV IN jack. Some digital camcorders have two
stereo tracks for audio. One is recorded at the time
of shooting; the other is for overdubbing after
shooting.
[Audio 1]
On the Audio 1 setting, the sound that was
recorded while shooting is used..
[Audio 2]
On the Audio 2 setting, the overdubbed sound
is used.
TV Rec Audio
When TV recording with bilingual, you can choose
audio channel to record.
[Main+Sub]
Main language and Sub language.
[Main]
Main language only
[Sub]
Sub language only.
Auto Chapter
When DVD recording, chapter markers are put in
specified setting. You can change this interval to
5 minutes, 10 minutes or 15 minutes. If you select
[None], switch off automatic chapter marking
altogether with the [None] setting.
System Setting 31
3