Audio Settings - LG RCT699H Owner's Manual

28 System Setting

Audio Settings

Each DVD disc has a variety of audio output
options. Set the recorder's Audio Output according
to the type of audio system you use.
Dolby Digital
[PCM]
Select when connected to a 2-channel digital
stereo amplifier. The Recorder's digital audio
outputs sounds in the PCM 2ch format when
you play a DVD video disc recorded on the
Dolby Digital recording system.
3
[Bitstream]
Select [Bitstream] if you connected the
Recorder's DIGITAL OUT jack to a Dolby Digital
decoder (or an amplifier or other equipment
with a Dolby Digital decoder).
DTS
[OFF]
If you select [OFF], the DTS signal is not output
through the DIGITAL OUT jack.
[Bitstream]
Select [Bitstream] if you connected the
Recorder's DIGITAL OUT jack to a DTS decoder
(or an amplifier or other equipment with a DTS
decoder).
MPEG
[PCM]
Select when connected to a 2-channel digital
stereo amplifier. The Recorder's digital audio
outputs sounds in the PCM 2ch format when
you play a DVD video disc recorded on the
MPEG2 recording system.
[Bitstream]
Select [Bitstream] if you connected the
Recorder's DIGITAL OUT jack to a MPEG
decoder (or an amplifier or other equipment
with a MPEG decoder).
Sampling Freq.
If your receiver or amplifier is NOT capable of
handling 96 kHz signals, select 48 kHz. When this
choice is made, this unit will automatically convert
any 96 kHz signals to 48 kHz so your system can
decode them. If your receiver or amplifier is capable
of handling 96 kHz signals, select 96 kHz. When
this choice is made, this unit will pass each type of
signal through without any further processing.
DRC (Dynamic Range Control)
With the DVD format, you can hear a program's
sound track in the most accurate and realistic
presentation possible, thanks to digital audio
technology. However, you may wish to compress
the dynamic range of the audio output (the
difference between the loudest sounds and the
quietest ones). Then, you may listen to a movie at
a lower volume without losing clarity of sound. Set
DRC to ON for this effect.