Fade-In Disc Information; Switching On Different Play Modes; Random Playback - EBENCH KH 6777 Operating Instructions Manual

1 In the program menu the first entry field under storage
place 1 is automatically marked. Press, one after the other,
the "0" button and "1" button to enter the title number
01.
2
Press the control button
entry field under program storage place 1.
3 Press once, one after the other, the "0" button, and once
the "3" button, to entre the chapter with the number
03.
4 Then select with the control buttons
input field under program storage place 2.
5 Press, one after the other, the "0" button and the "1" but-
ton to entre the title number 01.
6 Press once the control button to change to the second
input field under program storage place 2.
7 Then press, one after the other, the "1" and "0" buttons to
entre the chapter with the number 10.
8
Having programmed the two required chapters, select
with the control buttons
tion under the input fields. Press the "OK" button once to
start playback of the programmed chapters.

Fade-in disc information

Please note:
This function may not be available on all DVDs/VCDs/
S-VCDs! If you try to carry out a function that is not
available, then the symbol
evision screen.
With this function you can fade-in all available information
relating to a DVD/VCD/S-VCD loaded in the DVD Player dur-
ing playback on the television screen.
For this purpose proceed in the following manner ...
1 Press during playback the "Display" button on the remote
control once. The following will be faded in on the televi-
sion screen:
• Top left: The already played time of the currently playing
DVD/VCD/S-VCD in hours, minutes and seconds.
• Top right: The remaining time until the end of the cur-
rently playing chapter in hours, seconds and minutes.
2 Press the "Display" button a second time to display the
following on the television screen:
• The already played time of the currently playing DVD in
hours, minutes and seconds.
 KH 6777
IB_KH6777_EN
once to change to the second
the first
the "Prog. storage" op-
is displayed on the tel-
30
• The remaining time until the end of the currently playing
chapter in hours, seconds and minutes
• The type of loaded disc (DVD, VCD/S-VCD)
• The current title number/the total number of titles
• The current chapter number/the total number of chapters
• The currently selected camera angle/the number of cur-
rently available camera angles
• The currently set playback language
• The currently selected subtitle setting
3
To fade-out the disc information press the "Display" key
once again.

Switching on different play modes

Please note:
This function may not be available on all DVDs/VCDs/
S-VCDs! If you try to carry out a function that is not
available, then the symbol
evision screen.
The following play modes can be switched on during play-
back of a DVD/VCD/S-VCD:

Random Playback

When the random mode is switched on the chapters on the
loaded DVD will be played in a random order.
Proceed in the following manner to switch on random play-
back ...
1 Press the "Mode" key on the remote control once during
playback. The "Play Mode" menu will then be displayed
on the television screen:
Play Mode
Mode Off
Repeat Off
2 The "Mode" menu item is the first one to be automatically
selected.
Press the "OK" key to select between the two options
"Off" and "Shuffle" (in addition, with VCDs/S-VCDs you
can select the "PBC" option). Select "Shuffle" and press the
"Mode" key once again. The "Play Mode" menu is faded
out and the shuffle function is switched on.
3
To turn off the shuffle function press the "Mode key dur-
ing playback and select in the "Play Mode" menu, under
the "Mode" menu item the "Off" option by pressing the
23.09.2003, 0:56 Uhr
is displayed on the tel-