Removing The Halogen Lamps; Inserting The Halogen Lamps; Cleaning; Troubleshooting - Kompernass Powerfix KH 4077 Operating Instructions Manual

IB_KH4077_KO2561_UK.qxd
KH4077
The horizontal position is adjusted in
that the knurled screw
and, with the assistance of the flood-
w
light lever , it is placed in the desired
position. Retighten the knurled screw
when the optimal position has been
found.
The vertical position is adjusted in that
the fixing screw
with the assistance of the floodlight lever
w
, it is placed in the desired position.
Retighten the fixing screw,
the optimal position has been found.
Important! During the adjustments
always hold the floodlight lever
firmly.
Important! Do not use extension
cables that are longer than 15 m.

Removing the halogen lamps.

1. Switch the appliance off with the
ON/OFF switch
from the socket and allow the Floor
Halogen Floodlight to cool down.
2. Remove the middle screw on the
top of the lamp housing. Loosen
the glass cover
3. Use a dry cloth to take out the
halogen lamp.
4. Remove the halogen lamp.

Inserting the halogen lamps

1. Ensure that the Floor Halogen Flood-
light is switched-off and completely
cooled down.
2. Take the new halogen lamp from its
packaging with a dry cloth. Place a
ceramic end on the appropriate retainer.
05.03.2007 11:52 Uhr
t
is loosened
t
f
is loosened and and,
f
when
w
q
, remove the plug
g
.
Seite 6
3. Place the other ceramic end on the
opposite retainer. Ensure that contact
has been made on both sides. The
retainers should now hold the halogen
lamp securely, such that the halogen
lamp can no longer move itself.
4. Now close the glass cover
replace and retighten the middle screw.
5. Switch the Floor Halogen Floodlight
on with the ON/OFF switch
6. Should it not function, repeat steps
1- 5.

Cleaning

Danger of electrical shock
Always remove the plug from the socket
before cleaning the Stand Halogen
Floodlight.
Under no circumstances may the appli-
ance be immersed in water or held un-
der running water during cleaning.
Clean the exterior of the Stand Halogen
Floodlight with a moist cloth.
Attention!
Ensure the Floor Halogen Floodlight
is inaccessible for children.

Troubleshooting

Symptom:
The Stand Halogen Floodlight will not
switch on.
Possible cause and remedy:
Check if the Stand Halogen Lamp has
been correctly assembled or if it is possi-
bly damaged. Replace the halogen
lamps if necessary.
- 6 -
g
and
q
.