Using The Needle Threader - Baby Lock A-Line Maria BL23A Getting To Know Manual

Using the needle Threader

1. Raise the needle to its highest position by turning the handwheel towards you. Pull down the
needle threader knob as far as it will go.
2. Turn the knob in the direction of the arrow in the illustration, and then insert the Threader hook
into the needle eye. Lead the thread around threader guide and under Threader hook.
Threader guide
3. Turn the knob in the direction of the arrow in the illustration, drawing the thread loop through
the needle.
4. Pull the thread through the needle eye.
3 4
The needle threader can be used with a #11 to #16 needle or a Stretch needle103/705S.
Thread weight 50 to 90 should also work well.
1
2
4
3
5
Threader hook