Items Supplied; Appliance Description; Commissioning; Inserting The Batteries - Kompernass POWERFIX KH 4008 Operating Instructions Manual

Laser spirit level
Hide thumbs Also See for POWERFIX KH 4008:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Items supplied

Laser Spirit Level 40 cm
Laser-line attachment
Laser 90° angling attachment
Tripod, height-adjustable from 43-120 cm
Levelling plate
2 x 1,5 V Type AAA / LR03 / Micro
Transport case
Operating instructions

Appliance description

q

Laser Spirit Level

w
Spirit level
e
Battery compartment cover with ON/OFF switch
r
Laser optic
t
Adjustment spirit level (Levelling plate)
y
360° Angle scale
u
Adjustment screw ( Levelling plate)
i
Levelling plate
o
Crank
a
Fixing screw
s
Securing ring
d
Locking lever
f
Levelling spirit level
g

Tripod

h
Centre column with crank adjustment
j
Mounting base
k
Securing clamp
l
Spirit level for angle measurement
;
Laser 90° deflection attachment
2)
Laser-line attachment
2!
Securing screw (Levelling plate)

Commissioning

Inserting the batteries

• Unscrew the battery compartment cover
turning the knurled screw
Level to the left.
• Insert two batteries of type AAA / LR03 / Micro
as marked in the battery compartment of the
Laser Spirit Level.
• Close and firmly secure the battery compartment
e
cover
.
Laser Spirit Level
Switch-on: Turn the ON/OFF switch
engages at the rear.
Switch-off: Turn the ON/OFF switch
engages at the front.
Tripod
• Open the tripod
s
ring
touches the rubber ring at the end of the
column.
• Turn the securing ring
tight.
• Loosen the locking lever
g
the tripod
and extend them to the desired
length.
To neutralise the condition of the surface on which it
g
stands, the tripod
the help of the integrated spirit level
adjusting the length of the legs.
Notice:
The water bubble must be located in the middle of
the circular marking.
• Secure the legs of the tripod with the locking
d
lever
.
• Screw the levelling plate
the central column
- 3 -
of the Laser Spirit
until it
until it
g
so wide that the securing
s
clockwise until it is
d
, release the legs of
can be exactly aligned with
f
and by
i
onto the thread of
h
g
of the tripod
.
e
by

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents