Advertisement
12
11.
FIGURE 2 REAR PANEL CONNECTIONS
FIGURE
7 FRONT PANEL CONTROLS
..
7. A/C POWER CONNECTOR
This 3 prong connector
is for the A/C
power input,
8. LINE FUSE HOLDER
This is the A/C fuse protection
holder.
Use 12 amp slo blow.
9. LEFT SPEAKER OUTPUT "."
These are the "-" outputs
for the left
channel speaker.
10.LEFT SINGLE ENDED INPUT
This is the input for the left channel when
using an RCA single ended
channel
source.
11. LEFT SPEAKER OUTPUT "+"
These are the "+" outputs for the left
channel speaker.
12. OPT10NAL LEFT BALANCED INPUT
This is the input for the left channel when
using an XLR balanced
source.
1. POWER ON/OFF
This
rocker
switch
turns the A/C power
ON (press top) or OFF (press bottom.)
2. POWER INDICATOR
This light will be on whenever the 8002 is
in the on position.
3. OPTIONAL RIGHT
BALANCED INPUT
This is the input for the right channel
when using an XLR balanced
source.
4. RIGHT SINGLE ENDED INPUT
This
is the input for the right channel
when using an RCA single ended
channel source.
5.
RIGHT SPEAKER OUTPUT
"+"
These are the
"+"
outputs for the right
channel speaker.
6. RIGHT SPEAKER OUTPUT
"."
These are the
"-"
outputs for the right
channel speaker.
,it
,'",
;t.
Advertisement
