Table of Contents
Advertisement
Before Operation-DVD part
LANGUAGE
LANGUAGE
Menu Language
Disc Audio
Disc Subtitle
Disc Menu
Menu Language
Select a language for the VCR and DVD's setup menu
and information display.
Disc Audio / Subtitle / Menu
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
Original: Refers to the original language in which the
disc was recorded.
Other: To select another language, press number
buttons then ENTER/OK to enter the corresponding
4-digit number according to the language code list in
the reference chapter (see page 34). If you enter the
wrong language code, press CLEAR.
18
DISPLAY
English
Original
Off
Original
Move
Select
TV Aspect
4:3 : Select when a standard 4:3 TV is connected.
16:9 : Select when a 16:9 wide TV is connected.
DVD
Display Mode
Display Mode setting works only when the TV Aspect
mode is set to "4:3".
Letterbox: Displays a wide picture with bands on the
upper and lower portions of the screen.
Panscan: Automatically displays the wide picture on the
entire screen and cuts off the portions that do not fit.
TV Output Select
Set this unit TV Output Select options according to the
TV connection type.
YPbPr: When your TV is connected with the
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
jacks on this unit.
RGB: When your TV is connected with the SCART
(RGB signal) jack.
DISPLAY
TV Aspect
16 : 9
Display Mode
Widescreen
TV Output Select
RGB
Move
Select
DVD
DVD
Advertisement
Table of Contents
