Owner's instruction
Sanitary Water Heating Operation
1
Press repeatedly View
<Sanitary Water Heating Disable>
Sanitary water heating operation is operating only on enable condition.
2
During operation, segment will be on.
<Sanitary Water Heating ON>
<Note>
• This function is not used when the sanitary water tank is not installed.
• If you want to know more information, refer function code [15, 26~29] on installation
information section
Silent Mode Operation
Silent mode operation is that the outdoor unit works at reduced capacity so that the noise produced
by the outdoor unit drops.
Press Silent Mode Button. This button ON or OFF silent mode.
1
This implies that the indoor heating and cooling capacity will also drop. Beware of this
when a certain level of heating or cooling is required indoors.
Silent mode operation may not work while the product is proceeding higher priority
operation such as defrost operation, anti-freezing operation, and etc.
((When this mode is not operated by the priority order, ONLY display
12 Air-to-Water Heat Pump
Button to enable sanitary tank heating.
<Sanitary Water Heating enable>
<Silent Mode OFF>
<Silent Mode ON>
.)