How To Use - LG V-CP7N Quick Manual

E

How to Use

Connecting the flexible hose
Push the end of the head (1) on the flexible
hose (2) into the attachment point on the
vacuum cleaner.
To remove the flexible hose from the vacuum
cleaner, press on the button (3) situated on
the head, then pull upwards.
Assembling the tubes
(depending on model)
• Metal or plastic tube (4)
- Fit together the two tubes by twistingslightly.
• Telescopic tube (5)
- Push spring latch (6) forward.
- Pull out tube to required length.
- Release spring latch to lock.
Using the cleaning head and Accessory
(depending on model)
Nozzles
Fit the large cleaning head onto the end of
the tube.
• The 2 position head (7) is equipped with a
pedal (8) which allows you to alter its position
according to the type of floor to becleaned.
Hard floor position (tiles, parquet floors...).
Press on the pedal to lower the brush.
Carpet or rug position.Press on thepedal
to lift the brush up.
• Crevice Tool (9)
For vacuuming in those normally inaccess-
ible places i.e. reaching cobwebs, or down
the side of a sofa!
• Dusting brush (10)
For vacuuming picture frames furniture
outlines, books and other uneven objects.
• Upholstery Nozzle (11)
For vacuuming uphostery, mattresses, etc.
The thread collectors help to pick up the
threads and fluff.
How to plug in and use
Pull out the supply cord to the desired length
and plug into the socket.Press button (13) to
start the vacuum cleaner.To stop it press the
button (13) again.
Adjusting the power level
• If your appliance is equipped with an
electronic variable power control (13), you
can choose the power appropriated for the
task. (depending on model)
• The flexible hose handle (14) has a manualair
flow regulator (15) which allows you tobriefly
reduce the suction level.
Storage (16)
When you have switched off and unplugged
the appliance, press on the button (12) to
automatically rewind the cord.
You can move or store your appliance in a
vertical position by sliding the hook on the large
cleaning head into the clip on the underside
of the appliance.
Changing the dust bag
The dustbag needs changing when the cleaner
is set to maximum power and the cleaner head
is off the floor but the "bag full" indicator
window (17) is completely coloured red.
Even if the dustbag does not appear to befull
at this stage, it should be changed.
It could be that a great deal of very fine dust
has clogged up the pores of the dust bag.
• Turn off the appliance and unplug it.
• Open the cover by pressing the hook (18)
and lifting it up until it snaps into place.
Your appliance is equipped with either apaper
dust bag (19) or a fabric dust bag (21)
(depending on model).
• Take hold of the dust bag by the handleand
pull. Remove the bag and throw itaway.
• To refit a new bag push the cardboard support
of a new bag into the bag mount (20) until it
will go no further.
- 24 -