Auto Setup - LG DR386D Manual

DR386D-W.BAUSLLK_ENG 6/16/08

Auto setup

When the first time to turn on the unit, the initial setup
wizard sets the language, clock and channels
automatically.
1 Turn on the unit:
The initial setup wizard appears on the screen.
2 Choose a language:
3 Select the chosen language:
4 Check the antenna and go to the next step:
5 Choose a clock setting mode:
6 Select the chosen clock setting mode:
7 Set the clock:
This step is not available for Auto mode
8 Choose a broadcasting type: All or Analog
9 Select the [Start] and starts channel scan:
10 Close the initial setup:
Auto setup
Adjust the programmed channels
Press HOME, then use b b B B to select [Easy Menu] option. Press ENTER while
[SETUP] is selected. The SETUP menu appears on the screen. Select the
[Program Edit] on the second level options then press B B to move to the third
level. Press ENTER while [Edit] option is selected. The channel editing screen
appears on the screen.
Select which channel you would like to edit and press ENTER. An option menu
on the left side of the screen will be highlighted.
14
10:38 AM Page 14
ON REMOTE
POWER
v v V V
ENTER
ENTER
v v V V
ENTER
v v V V b b B B ,
ENTER
B B v v V V
B B ENTER
ENTER
[Favourite] Set the program to favourite channel.
[Delete]: Delete the selected channel from programmed channel list.
[Move] (Analog channel only): Change the order of the channels and which
numerical button they correspond to.
[Block] Blocks the program.
(Analog channel only):
[Station Rename]
channel.
(Analog channel only):
[Program Edit]
manually.
Editing a channel (Analog channel only)
You can change the settings of programmed channel by selecting [Program
Edit] option on the left side of the channel editing screen.
[PR]: Indicates the selected channel position.
[Seek]: Searches for a channel automatically. Searching stops when the unit
tunes in a channel.
[Ch.] Changes the channel number.
[MFT] Fine tunes the channel to obtain a clearer picture.
[NICAM]: Sets the channels for the NICAM broadcast.
[OK]: Confirm the settings and return to the channel list menu.
change a name of the selected
Change the settings of a channel