Panasonic Viera TX-P42ST50B Operating Instructions Manual page 6

■
Moving the TV
Before moving the TV, disconnect all cables.
● The TV is heavy. Move the TV with at least two people. Support as shown to avoid
injury by the TV tipping or falling.
●
Transport only in upright position. Transporting the TV with its display panel facing
upward or downward may cause damage to the internal circuitry.
■
When not in use for a long time
This TV will still consume some power even in the Off mode, as long as the mains plug is still connected to a live
socket outlet.
●
Remove the mains plug from the wall socket when the TV is not in use for a prolonged period of time.
■
Excessive volume
Do not expose your ears to excessive volume from the headphones. Irreversible
damage can be caused.
■
Built-in wireless LAN
●
To use the built-in wireless LAN, an access point needs to be obtained.
Do not use the built-in wireless LAN to connect to any wireless network (SSID ∗ ) for which you do not have usage
●
rights. Such networks may be listed as a result of searches. However, using them may be regarded as illegal access.
∗ SSID is a name for identifying a particular wireless network for transmission.
●
Do not subject the built-in wireless LAN to high temperatures, direct sunlight or moisture.
●
Data transmitted and received over radio waves may be intercepted and monitored.
● The built-in wireless LAN uses 2.4 GHz and 5 GHz frequency bands. To avoid malfunctions or slow response caused
by radio wave interference, keep the TV away from the devices such as other wireless LAN devices, microwaves,
mobile phones and the devices that use 2.4 GHz and 5 GHz signals when using the built-in wireless LAN.
●
When noises occur due to the static electricity, etc., the TV might stop operating for the protection of the devices. In
this case, turn the TV off with Mains power On / Off switch, then turn it on again.
● Additional information for built-in wireless LAN and access point may be on the following website.
http://panasonic.jp/support/global/cs/tv/
Bluetooth wireless technology
®
● The TV uses the 2.4 GHz radio frequency ISM band (Bluetooth
by radio wave interference, keep the TV away from the devices such as other wireless LAN devices, other Bluetooth
devices, microwaves, mobile phones and the devices that use 2.4 GHz signal.
6
). To avoid malfunctions or slow response caused
®