About The Pc Display - Panasonic HC-X909 Operating Instructions Manual

About the PC display

When the unit is connected to a PC, it is recognised as an external drive.
≥ Removable disk (Example:
We recommend using HD Writer AE 4.1 to
copy motion picture data.
Using Windows Explorer or other
programmes on the PC to copy, move or
rename files and folders recorded with
this unit will result in them being unusable
with HD Writer AE 4.1.
It is impossible to write data to the built-in
memory or SD card on this unit from a PC.
Example folder structure of an SD card:
CAM_SD
DCIM
PRIVATE
HC-X900M
Example folder structure of built-in
memory:
CAM_MEM/CAM_HDD*
CAM_MEM
DCIM
DCIM
AVCHD
AVCHD
100CDPFQ
101UDPBH
102CDPFR
103CDPFS
AVCHD
AVCHDTN
BDMV
PANA_EXT
100CDPFQ
100CDPFQ
101UDPBH
101UDPBH
102CDPFR
102CDPFR
103CDPFS
103CDPFS
AVCHDTN
AVCHDTN
BDMV
BDMV
PANA_EXT
) is displayed in [Computer].
The following data will be recorded.
1 MPO system/JPEG system still
pictures (up to 999 still pictures can
be recorded. ([S1000001.MPO],
[S1000001.JPG] etc.))
2 iFrame system/MP4 system motion
picture files ([S1000001.MP4] etc.)
3 JPEG system still pictures recorded
in Hi-Speed Burst Shooting Mode
4 MPO system/JPEG system still
pictures created from the motion
picture
5 The motion picture thumbnails
6 AVCHD format motion picture files
([00000.MTS] etc.)
7 For management
∫ Copying your still pictures to
your PC
Card reader function (mass storage)
Still pictures recorded with this unit can be
copied to the PC with Explorer or other
programmes.
1 Double click the folder that contains
the still pictures. ([DCIM] #
[100CDPFQ] etc.)
2 Drag and drop the still pictures onto
the destination folder (on the PC's
HDD).
≥ Do not delete the SD card's folders. Doing
so may make the SD card unusable in this
unit.
≥ When data not supported by this unit has
been recorded on a PC, it will not be
recognised by this unit.
≥ Always use this unit to format SD cards.
- 143 -