LG RC389HP Owner's Manual page 12

RC389H-P.BBELLLK_ENG 6/4/10
Connecting a cable box or satellite receiver
You can watch or record satellite/cable box if you connect a decoder (not sup-
plied) to the unit. Disconnect the unit's mains lead from the mains when con-
necting the decoder. You do not need to turn on the unit to view the signals
from the connected tuner on your TV.
Connecting to the AV2 DECODER jack
Connect a VCR or similar recording device to the AV2 DECODER jack of this
unit. You do not need to turn on the unit to view the signals from the connected
tuner on your TV.
12
4:32 PM Page 12
To watch or record satellite/cable
box, set [AV2 Connection] option to
[Decoder] (see page 16) and set
the program's [Decoder On/Off]
option to [On] on the Setup menu
(page 14).
If you disconnect the unit's mains
lead, you will not be able to view
the signals from the connected
decoder.
To watch or record the source from
AV2 DECODER jack, set [AV2
Connection] option to [Other Device]
(see page 16) and set [AV2
Recording] option to [Auto], [CVBS],
[RGB] or [S-Video] as required (see
page 18).
Pictures containing copy protection signals that prohibit any copying cannot
be recorded.
If you pass the unit signals via the VCR, you may not receive a clear image
on your TV screen.
Be sure to connect your VCR to the unit and your TV in the order shown
below. To watch video tapes, watch the tapes through a second line input on
your TV.
When you record to a VCR from this unit, do not switch the input source to
TV by pressing the TV/VCR button on the remote.
If you are using a B Sky B tuner, be sure to connect the tuner's VCR SCART
jack to the AV2 DECODER jack.
If you disconnect the unit's mains lead, you will not be able to view the sig-
nals from the connected VCR or tuner.