Installation - Goldstar DH300M Owner's Manual

Installation

Choosing the proper location for your dehumidifier
• Use the dehumidifier in a
basement to help prevent
moisture damage.
Installing the dehumidifier properly
1.
Allow at least 12 inches of space on all sides of the unit for good air circulation.
2.
Install your dehumidifier on a floor, table, or shelf. When installing the dehumidifier
on a table or shelf, make sure the table or shelf is strong enough to support the weight
of the dehumidifier with a full bucket. Do not sit or stand on the dehumidifier.
Secure wheels with blocks to prevent unit from falling when installed on a table or shelf.
The height of a table or shelf might provide a better position from
NOTICE
which to handle the bucket and help prevent icing of the coils due to
colder air near the floor (such as in a basement.)
3.
Lift the bucket and place it in the dehumidifier, making sure the slots on
the bottom side of the bucket are positioned correctly.
4.
Rollers let you move the dehumidifier easily.
The cleaning of bucket
1.
Pull out the bucket cover.
• Use the dehumidifier in laundry
drying, bathing, and dishwashing
areas which have excessive
moisture.
2.
Brush off the residue in the bucket.
Clean the bucket by
NOTICE
wiping with a brush or a cloth
dampened in a mild detergent
solution.
Installation
• Use the dehumidifier to prevent
moisture damage where books
are stored.
12"
3.
Close the cover.
Push the tabs on the top
NOTICE
of the bucket when installing
the bucket.
Owner's Manual 13
12"