Conducting Phone Calls; Making A Call; Answering An Incoming Call; Ending A Call - Denon GLOBE CRUISER AH-NCW500 Owner's Manual

Conducting Phone Calls

Your Denon Globe Cruiser headphones feature integrated controls
and microphones for easy hands free phone conversations. The call
button on the left ear cup allows you to easily operate Bluetooth
compatible mobile phones once they're paired with the headphones
(vpage 3 "Pairing with a Bluetooth device").
NOTE
The Bluetooth function will turn off automatically when a device is
connected using the audio cable, and calls using the headphones will
be disabled.
Call button

Making a call

There are 2 methods of making a phone call:
q dial the phone number manually using the paired mobile phone, or
w press the call button on the headphone once to use voice activated
call dialing. When you make a call, audio playback will be paused
temporarily until the call has been ended.

Answering an incoming call

When an incoming call is detected, you will hear the music pause and
a ringtone sound come over the headphones.
Press the call button once to answer the call.

Ending a call

To end a phone conversation, press the call button once. When the
call has ended, playback of the music that you're listening to will
resume automatically.

Using the call waiting function

Use either of the following methods to take an incoming call while a
call is in progress.
NOTE
Certain mobile phones may not support call waiting.
n End the current call and take the new call
When another incoming call is detected while a call is in progress,
press the call button one time.
n Put the current call on hold and take the new
call / switch to the on-hold call
Press and hold the call button for approx. 3 seconds.

Ignoring an incoming call

When an incoming call is detected, press and hold the call button for
approx. 3 seconds to ignore the call.
Switching from headphones to the mobile
phone during a call
Press and hold the call button for approx. 5 seconds or more to switch
from talking through the headphones to talking on the mobile phone
itself.
NOTE
This switching is not possible during the call waiting function. In such
cases, the switching must be performed at the mobile phone.
6

Other operations

Incoming call
Answer
Press call button once
detected
Redial Press call button two times
In standby
Voice dial /
mode / during
voice- Press call button one time
audio playback
activated call
End call
Press call button one time
Call in progress
Mute on/off
Press call button two times
• Spin the control wheel to adjust the volume level of the other caller's
voice.
• In order to make a call using the headphones, the connected
Bluetooth device must support either HSP (Headset Profile) or HFP
(Hands-Free Profile). z
• In order to make or answer a call during audio playback, the connected
Bluetooth device must support either HSP (Headset Profile) or HFP
(Hands-Free Profile), and must also support A2DP. z
z Refer to the Bluetooth device's owner's manual for information on
supported Bluetooth profiles.