Pairing With A Bluetooth Device - Denon GLOBE CRUISER AH-NCW500 Owner's Manual

Pairing with a Bluetooth device

To listen to music or make phone calls, the Bluetooth device must first
be registered (pairing).
After pairing has been completed, the Bluetooth device can be
reconnected to the headphones.
NOTE
Please pair devices again in the following cases.
• After nine devices or more have been paired
The headphones can register a maximum of eight devices. From the
ninth device onward, new pairings will overwrite previously stored
pairing information, starting from the oldest pairing.
• If the pairing information on the headphones or Bluetooth device has
been deleted
1
With the headphones'
Bluetooth function
off, press and hold the
Bluetooth button for
approx. 4 seconds.
• The red and blue LED indicators
will alternately flash, and the
headphones will enter pairing
standby mode.
• If the Bluetooth function is
on, turn it off (vpage 4
"Turning Bluetooth Wireless
Connectivity On").
2
Initiate pairing procedures on the Bluetooth device
to be connected, and search for the headphones.
• Refer to the Bluetooth device's owner's manual for details.
• If a PIN code (passkey) is requested, enter "0000" (four zeros).
• The blue LED indicator will light up for approx. 5 seconds
when pairing has been completed.
• The headphones will exit pairing standby mode if pairing has not
been completed within 3 minutes. In this case, press and hold the
Bluetooth button for 5 seconds or more to turn off the Bluetooth
function, then start the pairing process again.
• The headphones will be shown as "DENON AH-NCW500" on the
Bluetooth device to be paired with.
n Deleting pairing information
If incorrect pairing information has been registered or you wish to
pair devices again, delete the registered pairing information first.
Press and hold the call button for approx. 5 seconds or more when
the headphones and Bluetooth device are paired to delete the
pairing information. When the information is deleted, a beeping
sound will be emitted and the red and blue LED indicators will flash
simultaneously five times.
3
Preparation for Use