Download Print this page

Abocom AP900 Specification page 2

Wireless 802.11g access point

Advertisement

Specification
IEEE 802.11g
IEEE 802.11b
Standards
IEEE 802.11
IEEE 802.3u 100Base-TX Fast Ethernet
ANSI/IEEE 802.3 N-way Auto-Negotiation
Channels
&
Frequency
Data Rate (wireless)
54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, and 1Mbps
W/ automatic fallback
64-bit, 128-bit WEP encryption
MAC Address filter
Security
802.1x
WPA (Wi-Fi Protected Access)
Antenna
2dbi
Button
One Factory Reset button
Power
Status
Ethernet
LED indicators
Wireless (bridge mode)
Wireless (bridge mode)
Wireless
Management
Web-Based configuration and management
5.0VDC, 1.5A input.
Power
Physical Dimension
127 x 91.1 x 24.7(mm) (Width x Depth x Height)
Weight
190g
Operating: 0~50 ℃
Temperature
Storing: 0~70 ℃
Humidity
95% maximum (non-condensing)
FCC
Safety & Emission
CE
USA (FCC): 2.412GHz ~ 2.462GHz (Ch1-11)
Europe (CE): 2.412GHz ~2.472GHz (Ch1-13)
always On / Blinking: while upgrading firmware
On: Link / Off: Not Link / Blinking: Active
On: 100Mbps / Off : 10 Mbps
On: Full duplex / Off: half duplex
On: Associated / Off : not Associated
On: Ready / Off : Not ready; Blinking : try to connect.
Blinking : Active

Advertisement

loading