Advertisement
. Place the gimp thread over the front ridge of
the buttonhole foot and pull the thread ends
under the sewing foot to the back into the left
and right of the back ridge.
.
.
Push the runner to the front up to the second
red mark.
Now sew buttonhole No. 40, 41 or 42.
-I
1
pI
TI
Buttonholes with gimp thread
To produce highly durable and neat buttonholes,
we recommend using a gimp thread. Use pearl
cotton or a regular gimp thread for this purpose.
I
V
. After finishing the buttonhole, pull the left
thread end until the loop is covered by the
buttonhole bartack.
4-'
00
•?
Ci-'
0
• Cut off the loose thread ends close to the
bartack.
2
E
a,
—ø
cQ)
o D
143
Advertisement
