Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Nxg NX-BAS-500
Summary of Contents for Nxg NX-BAS-500
- Page 1 Owner’s Manual Model NX-BAS-500 12˝ 500 watt Powered Subwoofer...
- Page 2 It’s the best possible protection for your pour alerter l’utilisateur de la presence à l’intérieur du coffret de “voltage dangereux” NX-BAS-500 if you need to move it or return it non isolé d’ampleur suffisante pour constituer un risque d’éléctrocution.
- Page 3 2. CROSSOVER FREQUENCY CONTROL. This con- trol determines what lower part of the frequency spec- trum will be reproduced by the NX-BAS-500. It is a “crossover” control. Rotating the knob sets the point where all lower frequencies will be handled by the subwoofer.
- Page 4 The main thing to remember is that there is no of your main stereo speakers. “right” or “wrong” place to put the NX-BAS-500. It all depends on how much bass you want. Four factors need to be considered: Another reason to experiment –...
- Page 5 Set the subwoofer’s crossover to 120 Hz. 2. Locate the subwoofer or LFE output connector on the rear of your 6. You are now ready to put your NX-BAS-500 subwoofer into use. receiver and connect one end of the RCA line level cord to it.
- Page 6 5. Connect your main speakers to the speaker terminals on the back of your power amplifier. 6. You are now ready to put your NX-BAS-500 subwoofer into use. Skip to “E – INITIAL LISTENING TEST.” FIG.4 –...
- Page 7 OVER FREQUENCY knob to 80 Hz for normal operation, or to 120 Hz for on the back of the NX-BAS-500. Make sure that left is connected to left Dolby Digital operation where the proper crossover frequency is set in the and right is connected to right.
- Page 8 1. Is your NX-BAS-500 plugged in to a live AC wall water marks you can use a soft, dry years from the date of the original customer’s socket? cloth.
Need help?
Do you have a question about the NX-BAS-500 and is the answer not in the manual?
Questions and answers