Nxg NX-PROSUB125 Owner's Manual

Nxg NX-PROSUB125 Owner's Manual

Pro series powered subwoofer

Advertisement

Owner's Manual
Model NX-PROSUB125
Model NX-PROSUB300
10˝ 125 watt
12˝ 300 watt
Powered Subwoofer
Powered Subwoofer

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NX-PROSUB125 and is the answer not in the manual?

Questions and answers

Summary of Contents for Nxg NX-PROSUB125

  • Page 1 Owner’s Manual Model NX-PROSUB125 Model NX-PROSUB300 10˝ 125 watt 12˝ 300 watt Powered Subwoofer Powered Subwoofer...
  • Page 2 To do this, the NX-PROSUB125/NX- PROSUB300 incorporates its own built-in crossover system that automatically “assigns” lower frequencies to its own power amplifier, contained within the sub- woofer enclosure.
  • Page 3 These color-coded connectors are used to hook the indicator is off. the NX-PROSUB125/NX-PROSUB300 to your receiver if it does not have sub- woofer out or LFE output connections. This is explained 3. CROSSOVER FREQUENCY CONTROL. This control determines in item 6 above.
  • Page 4 With tower speakers, side wall or rear placement is also acceptable. Two basic connection options 2. Wall outlet. Since the NXG subwoofer requires AC power, it must be placed where it will reach a wall outlet. We don’t recommend extending that range with an extension cord.
  • Page 5 3. Connect one speaker wire to the RIGHT “+” and “–” speaker terminals of your receiver or integrated amplifier. Then connect the 6. You are now ready to put your NX-PROSUB125/NX-PROSUB- other end of this speaker wire to the RIGHT “+” and “–” FROM...
  • Page 6 NX-PROSUB125/NX-PROSUB300 location. This 5. Note: If you are using a Dolby Digital type receiver with built-in should be available from your NXG dealer or from radio supply stores. crossover, you must set the crossover frequency in your receiver 1.
  • Page 7 POWER indicator is glowing. If it Frequency Response 8. After you are satisfied with the output of isn’t, check the power connections between NX-PROSUB125: 25 Hz - 180Hz Variable your NX-PROSUB125/NX-PROSUB300, you the NX-PROSUB125/NX-PROSUB300 and NX-PROSUB300: 22 Hz - 180Hz Variable can make all your volume settings through the wall socket.
  • Page 8: Warranty Service

    NXG’s liability for any defective product is limited to repair or that sound source playing? replacement of the product at our option. NXG shall not be liable 3. Do you have an unconnected tape monitor selected? for incidental or consequential damages of any kind or character because of product defects.

This manual is also suitable for:

Nx-prosub300

Table of Contents