Download Print this page
Maytag MVWX500XL0 Installation Instructions Manual

Maytag MVWX500XL0 Installation Instructions Manual

Washer
Hide thumbs Also See for MVWX500XL0:

Advertisement

Available languages

Available languages

WASHER
INSTALLATION
INSTRUCTIONS
INSTRUCTIONS
POUR UINSTALLATION
DE LA LAVEUSE
Table
of Contents
WASHER SAFETY .........................................................
1
iNSTALLATiON
REQUIREMENTS
................................
2
Tools and Parts ................................................................
2
Location Requirements
..................................................
2
Drain System ...................................................................
3
Electrical
Requirements
.................................................
4
iNSTALLATiON
iNSTRUCTiONS
..................................
4
Before you start: remove shipping
materials
............... 4
Connect Drain Hose ........................................................
5
Connect Inlet Hoses ........................................................
6
Level Washer ...................................................................
7
Complete
Installation Checklist
.....................................
8
Table
des
matibres
SECURIT¢:: DE LA LAVEUSE ................................................
9
EXIGENCES
D'INSTALLATION
.................................................
9
Outillage et pi_ces ....................................................................
9
Exigences
d'emplacement
....................................................
10
Syst_me de vindange ..............................................................
10
Specifications
_lectriques
......................................................
11
INSTRUCTIONS
D'INSTALLATION
........................................
12
Avant de commencer
: retrait du materiel
d'exp_dition
...... 12
Raccordement
du tuyau de vidange ......................................
13
Raccordement
des tuyaux d'arriv_e
d'eau ...........................
14
(=tablissement
de I'aplomb
de la laveuse ..............................
15
Liste de v_rification
pour I'ach_vement
de I'installation ..... 16
iNSTALLATiON NOTES
NOTES CONCERNANT
L'INSTALLATION
Date of purchase:
Date of installation:
Installer:
Model number:
Serial number:
Date d'achat:
Date d'installation:
Installateur:
Num_ro de module:
Num_ro de s_rie:
WASHER
S_ETY
Your safety and the safety
of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow
instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
W10240509A
W10240510A=SP

Advertisement

loading

Summary of Contents for Maytag MVWX500XL0

  • Page 1 WASHER INSTALLATION INSTRUCTIONS INSTRUCTIONS POUR UINSTALLATION DE LA LAVEUSE Table of Contents Table matibres SECURIT¢:: DE LA LAVEUSE ..........WASHER SAFETY ............EXIGENCES D'INSTALLATION ..........iNSTALLATiON REQUIREMENTS ........ Tools and Parts ..............Outillage et pi_ces ..............Location Requirements ..........Exigences d'emplacement ............
  • Page 2 INSTALLATION REQUIREMENW$ TOOLS PARTS Parts needed: (Not supplied with washer) Gather required tools and parts before starting installation. Tools needed: Inlet hoses with flat washers To order, please refer to toll-free phone numbers on back page of Adjustable or open end Level your Use and Care Guide.
  • Page 3 D IN SYSTEM You will need: [] A water heater set to 120 ° F (49° C). Drain system can be installed using a floor drain, wall standpipe, [] A grounded electrical outlet located within 4 ft (1.2 m) of power floor standpipe, or laundry tub.
  • Page 4 INS%ALLATION INSTRUC%IONS ELECTRICAL REQUIREMENTS Excessive Weight Hazard Use two or more people to move and install washer. Failure to do so can result in back or other injury. Before you start: remove shipping materials Electrical Shock Hazard It is necessary to remove all shipping materials for proper Plug into a grounded 3 prong outlet.
  • Page 5 CONNECT DRAIN HOSE Remove packing tray from drum 5, Attach drain hose to drain port Remove tape from washer lid, open lid and remove cardboard packing tray from tub. Be sure to remove all parts from tray. If clamp is not already in place on elbow end of drain hose, NOTE: Keep tray in case you need to move washer later.
  • Page 6 9, Clear water lines 7, Remove drain hose form (floor drain installations only) Run water for a few seconds through hoses into a laundry tub, drainpipe or bucket to prevent clogs. Water should run until clear. For floor drain installations, you will need to remove the drain hose form from the end of the drain hose.
  • Page 7 Adjust leveling feet 2. Secure drain hose Wall Secure drain hose to laundry tub leg, drain standpipe or inlet If washer is not level, use a 9/16" or 14 mm open-end or hoses for wall standpipe with beaded tie strap. adjustable wrench to turn jam nuts clockwise on foot until they are about 1/2"...
  • Page 8 COMPLETE LAWION Check electrical requirements. Be sure you have correct electrical supply and recommended grounding method. Check that all parts are now installed. If there is an extra Electrical Shock Hazard part, go back through steps to see what was skipped. Plug into a grounded 3 prong outlet.
  • Page 9 SNCURITN DN LA LA USN Votre s6curit et celle des autres est tr s importante. Nous donnons de nombreux messages de s_curit6 importants dans ce manuel et sur votre appareil m6nager. Assurez-vous toujours lire tousles messages de s6curit6 et de vous y conformer. Voici le symbole d'alerte de s6curite.
  • Page 10 3 II Autres pi_ces : (Non fournies avec la laveuse) (76 ram) II se peut que I'installation n6cessite des pieces suppl6mentaires. Pour commander, consulter les num@os d'appel sans frais figurant sur la page de couverture des Instructions d'utilisation de la laveuse. Si vous avez II vous faudra 14"...
  • Page 11 Syst_me de vidange avec tuyau de rejet SFECIFIC,ATION$ ELECTRIQUE$ I'_gout mural Risque de choc _lectrique Voir les exigences pour le systeme de vidange avec tuyau de rejet a 1'6gout au plancher. Brancher sur une prise _ 3 alv_oles reli_e a la terre. Ne pas enlever la broche de liaison _ la terre.
  • Page 12 INSTRUCTIONS D'INSTALLATION iNSTRUCTiONS DE LiAiSON A LA TERRE Pour une laveuse relJ_e _ la terre et connect_e par cordon Cette laveuse dolt 6tre reli6e & la terre. En cas d'anomalie Risque du poids exeessif de fonctionnement ou de panne, la liaison & la terre r6duira Utiliser deux ou plus de personnes pour d_placer et le risque de choc 61ectrique en offrant au courant 61ectrique...
  • Page 13 CORDEMENT DU TUYAU Retrait du carton plat du tambour DE _D_GE Fixation du tuyau de vidange i'orifice de vidange Retirer le ruban adh_sif du couvercle de la laveuse, ouvrir le couvercle et retirer le carton plat d'emballage de la cuve. Veiller a retirer toutes les pieces du carton plat.
  • Page 14 7, Retrait de ia bride de retenue 9, Purger les canalisations d'eau pour tuyau de vidange (installations avec vidange au plancher uniquement} Faire couler I'eau par les tuyaux dans 1'6vier de buanderie, le tuyau de rejet a 1'6gout ou le seau pendant quelques secondes pour 6viter toute obstruction.
  • Page 15 Ajuster ies pieds de nivellement "12, Imrnobiliser le tuyau de vidange Tuyau de rejet a ,crou Fixer le tuyau de vidange au pied de 1'6vier de buanderie, au Si la laveuse n'est pas d'aplomb, utiliser une cl6 plate tuyau de rejet a 1'6gout ou aux tuyaux d'arriv6e d'eau pour le ou une cl6 &...
  • Page 16 LISTE DE VERIFICATION FOUR UACHEYTMENT DE UINS LATION Consulter les sp6cifications 61ectriques. S'assurer de disposer d'une source d'61ectricit6 appropri6e et d'une liaison a la terre conforme a la m6thode recommand6e. Risque de choc _lectrique V6rifier que toutes les pieces sont maintenant install6es. Brancher sur une prise &...