Table of Contents
Advertisement
1. Switch off at the socket outlet and pull out the mains plug.
2. Remove all food, loose items and fittings from inside the appliance and door
shelves.
3. Unscrew the bolts and remove the upper and bottom hinges from the
cabinet and door. (1) (2)
4. Remove stoppers. (3) (4)
5. Fit the stoppers on the opposite side. (5) (6)
6. Reposition the upper hinge on the opposite side as bottom hinge (7)
7. Reposition the bottom hinge on the opposite side as upper hinge. (8)
Locate the door and tighten the bolts fixing the door.
To change door from R/H to L/H please follow procedure
below:
1. Carefully remove the lower then the upper Torx screws that hold the door to
the hinges.
2. Open hinges fully then carefully remove the self tap countersunk screws
holding the hinges to the cabinet.
3. Remove the plastic covers from the L/H hinge fixing points and carefully re
insert in the R/H holes.
4. Carefully place the self tap screws into the new fixing points applying gentle
pressure until they start to bite (at this point it may help to have someone at the
back of appliance to support).
5. For ease of fixing we recommend screwing all the way in, and then ease back
out.
6. Re fit hinge
7. Tighten the screws firmly.
8. Re fit door, loosely fixing the top screws first, and then fit the lower screws.
9. When all screws fitted; tighten firmly and check door for alignment.
11
EN
Advertisement
Table of Contents
