Basic Operation; Mute; Using The Eq; Adjusting The Sound Level - LG LAC8900RN Owner's Manual

Basic Operation

1. Turn the unit on.
2. Select a source.
3. Adjust the volume.
Basic operation - more you can do

Mute

Press PWR/MUTE (POWER on the remote control) to cut the sound. To
cancel it, press again.

Using the EQ

EQ is to increase or decrease the signal strength of audio frequencies. The func-
tion helps you to enjoy sound more plentifully. Press EQ/XDSS+ repeatedly. The
screen lights up in the following order.
POP t CLASSIC t ROCK t JAZZ t VOCAL t SALSA t SAMBA t
REGGAE t RUSSY t USER1 t USER2 t Off (not displayed)
Note
• When XDSS+ is set to "Off", you can adjust the EQ settings.
• You can adjust sound level to your preference. Once you select a USER mode
and then make an adjuatment, it will be automatically stored for the currently
selected USER mode. Refer to the "Adjusting the sound level" for USER
mode.
10 CAR CD/MP3/WMA Receiver
ON PLAYER ON REMOTE
PWR/MUTE POWER
SRC
SRC
Rotate PWR
VOLUME

Adjusting the sound level

Press SEL/MENU (SEL/MENU on the remote control) repeatedly to select the
mode you want to adjust from VOL (volume), BAL (left/right speaker), FAD
(front/rear speaker) and SUB (Sub-woofer: optional). To adjust sound quality,
rotate PWR or press VOLUME
Note
When EQ and XDSS+ is set to "Off", you can also adjust the sound level (BAS
(bass), MID (middle), TRB (treble)) settings.
XDSS+ (Extreme Dynamic Sound System)
Press and hold EQ/XDSS+. (XDSS+ : Improves the treble, bass sound.)
To cancel it, press and hold again.

Checking the clock

You can see the clock pressing DISP (DISP. on the remote control).

Setting the clock

When RDS CT information is not received and then you set C-T to OFF, you
can adjust the time by yourself.
Refer to the page 13 for setting the C-T (Clock Time) ON/OFF.
1 Press the DISP (DISP. on the remote control) and then, press and hold DISP
for more 1 second.
2 Press the B?+ ( M M? on the remote control) to adjust the hour.
3 Press the -?b ( ?m m on the remote control) to adjust the minute.
4 Press the DISP (DISP. on the remote control) again to finish the setting.