C
leaning and Maintenance
Cold water washing
• If you always use COLD water, we recommend that a WARM or HOT wash be used at a regular
intervals e.g. every 5th wash should be at least a WARM one.
When you have finished
• Turn off taps to prevent the chance of flooding should a hose burst.
• Always unplug the power cord after use.
Close the tap before turning off the power.
1
Select both HOT/COLD and then press the
[
from the machine completely.
After removing the water supply
3
hose pull out the filter.
Then use a brush to clean the filter.
• Before cleaning the filter, the impurities in the water supply hose should be removed.
1
2
• If the lint filter is torn or damaged, purchase a new one from LG service center.
1
Place a towel on the
floor under the drain
pump cap. Excess
water may flow out.
• Check if water leaks after reassembling. (The Rubber ring is in the cap)
] button to remove water
3
4
2
Turn the cap
3
counter-
clockwise and
pull it out.
Turn off the power before
2
pulling out the cord.
4
Replace the filter after cleaning it.
5
Remove any foreign
4
objects and fluff inside
pump casing and from the
filter.
6
Replace the cap. Insert the filter along
the guide ribs inside the pump casing.
Filter must face the guide ribs inside
pump casing and securely turn the cap
clockwise.