Installation - LG Refrigerator Owner's Manual

THIS REFRIGERATOR IS MANUFACTURED WITH GREAT CARE, AND UTILIZES THE
LATEST IN TECHNOLOGY
WE ARE CONFIDENT THAT YOU WILL BE FULLY SATISFIED WITH IT'S PERFORMANCE
.
AND RELIABILITY
BEFORE YOU START YOUR REFRIGERATOR, PLEASE READ THIS BOOKLET CAREFULLY.
IT PROVIDES EXACT INSTRUCTIONS FOR INSTALLATION, OPERATION AND
MAINTENANCE, AND ALSO SUPPLIES SOME USEFUL HINTS.
ENTRY
The model and serial numbers are found on the inner case back of refrigerator compartment of this unit. These
numbers are unique to this unit and not available to others. You should record requested information here and
retain this guide as a permanent record of your purchase. Staple your receipt here.
Date of Purchase
Dealer purchased from
Dealer address
Dealer phone no.
Model no.
Serial no.

INSTALLATION

1. Select a good location.
Place your refrigerator where it is easy to use.
2. Avoid placing the unit near heat sources, direct
sunlight or moisture.
3. To ensure proper air circulation around the
fridge -freezer, Please maintain sufficient space
on both the sides as well as top and maintain at
least 2 inches (5 cm) from the rear wall .
The refrigerator should be elevated 1 inch from
the floor, especially if it is carpeted.
4. T avoid vibrations, the unit must be level. o
If required, adjust the leveling screws to
compensate for unevenness of the floor.
The front should be slightly higher than the rear
to aid in door closing.
Leveling screws can be turned easily by tilting
the cabinet slightly.
Turn the leveling screws clockwise(
the unit, counterclockwise(
5. Install this appliance between 10°C and 43°C.
If the temperature around the appliance is too
low or high, cooling ability may lessen.
6. The Refrigerator must be positioned so that the
plug is easily accessible.
.
: .................................................................................................
.................................................................................................
:
.................................................................................................
:
.................................................................................................
:
.................................................................................................
.................................................................................................
:
:
) to raise
) to lower it.
3
NEXT
1. Clean your refrigerator thoroughly and wipe off
all dust accumulated during shipping.
2. Install accessories such as ice cube box, etc., in
their proper places.They are packed together to
prevent possible damage during shipment.
3. Connect the power supply cord (or plug) to the
outlet. Don't double up with other appliances on
the same outlet.
4. Prior to storing food, leave your refrigerator on
for 2 or 3 hours.
Check the flow of cold air in the freezer
compartment to ensure proper cooling.
Your refrigerator is now ready for use.