Playing The Ipod - LG HT564DG Owner's Manual

HT564DG-D0P_BDEULL_ENG_0746

Playing the iPod

For detail refer to iPod guide.
iPod mode: You can operate your iPod by using the supplied remote
control and directly control on your iPod.
OSD iPod mode: You can operate your iPod by controlling OSD menu
on the TV screen with supplied remote control. The controls on your iPod
are not operational in the OSD iPod mode.
1 Connect the iPod dock on the rear of the
unit.:
2 Connect your iPod to the dock.:
3 Turn the power on:
4 Select the OSD iPod or iPod function:
5 Select the menu:
If you want to move backwards in the
menu, press MENU
6 Select a file:
7 Start the file playing:
8 To stop the file playing:
9 Before disconnecting the iPod, change to
any other function by pressing:
10 Remove the iPod:
18
5/25/09 5:05 PM Page 18
ON REMOTE
-
-
POWER
FUNCTION
U U u u and ENTER
U U u u
B PLAY or ENTER
x x STOP
FUNCTION
-
Playing the iPod - more you can do
Pauseing playback
Press PAUSE/STEP (X X ) or PLAY (B B ) to pause playback. Press PAUSE/STEP
(X X ) or PLAY (B B ) to continue playback.
Skipping to the next/previous file
Press SKIP (> > ) to move to the next file.
Press SKIP (. . ) to return to the beginning of the current file.
Press SKIP (. . ) twice briefly to step back to the previous file.
Fast forward or fast reverse
Audio files: During playback, press and hold SCAN (m
release at a point you want.
Video files: During playback, press SCAN (m
continue play at normal speed.
Playing repeatedly
Press REPEAT/RANDOM repeatedly to select an item to be repeated. The
current file will be played back repeatedly. To return to normal playback, press
On video files, this function is not available.
REPEAT/RANDOM repeatedly. (
iPod message OSD iPod mode
"Please, check your iPod" - If the power of your iPod is insufficient or the
iPod is misconnected or unknown device. Reset the iPod if the iPod is not
operating normally (Refer to http://www.apple.com/support/)
"Connect Video Out(only composite) from the HTS to the TV and switch
TV input accordingly.", "Please, Control through an iPod's display." -
When you connect the unit and TV to COMPONENT VIDEO OUT or HDMI
OUT, connect the unit and TV to VIDEO OUT.
Compatible iPod
• When the unit is connected with dock connector may result in malfunctions
• Compatibility with your iPod may vary depending on the type of your iPod.
• Depending on your iPod's software version, it may not be possible to control
your iPod from the unit. We recommend installing the latest software version.
When you use iPod, look out for the following
• Interference may happen depending on iPod devices.
• The video files are outputted only when you connect the unit to VIDEO OUT.
• Connect the end on the cable with the marked "V" facing downwards to rear
on the unit.
• Be careful not to put iPod dock strongly into the unit when connecting or
disconnecting it. But the cable may be damaged.
m or M M ) and then
m or M M ). Press PLAY (B B )
)