Using The Cooktop; Cooking Areas - LG LRE3021ST Owner's Manual

USING T HE COOKTOP 19
USING THE COOKTOP
COOKING AREAS
The cooking areas on your range are identified by
permanent circles on the glass cooktop surface. For the
most efficient cooking, fit the pan size to the element
size.
Pans should not extend more than 1/2 to 1-inch be-
yond the cooking area.
When a control is turned on, a glow can be seen through
the glass cooktop surface. The element will cycle on
and off to maintain the preset heat setting, even on
Hi.
For Modeh LRE3027, LRE3085
For Modeh LRE3083
For Modeh LRE3021
Hot surface indicator
HS (Hot Surface) will appear in the display once the
element is turned off or during the self clean cycle. The
HS indicator will stay on until the surface has cooled to
approximately 1SO°F (66°C) or when the self clean cycle
ends.
CAUTION
It is normal for the surface elements to cycle on and
off during cooking, even on higher settings. This will
happen more frequently if cooking on a lower tem-
perature setting.
Using the cool<top elements
To turn on a SINGLE element
Press the ON/OFF button that controls the element
that you would like to use.
2. Press the + button once to adjust the element tem-
perature to Hi, or the - button once to adjust the
element temperature to Lo.
3. Use the - / + buttons to adjust the element tem-
perature settings. The element temperature settings
are adjustable at all times.
4.
To turn off the element after cooking, press the ON/
OFF button once.
.... NOTE
• Hi is the highest temperature available. |
• Lo is the lowest temperature available.
/
• Press and hold the + or - buttons to quickly scroll
through the temperature settings.