Adapter; Charging Ni-Mh Batteries; Dynamo Charging - Kaito KA600 Operation Manual

POWER SUPPLY

Adapter

(1)Plug one port of the adapter into the AC socket and
plug the other port into the <DC IN 6V> jack.
(2)Select the <Power Select> switch to "ADAPTOR"
position. If you connect correctly, the icon "
will show in the display.
Adapter
Jack
%
COUNTY
ALL SINGLE
MULTIPLE
ENABLE
DISABLE
Select "Power Select" to
"ADAPTOR" Position
NOTE:In unit off mode, please don't use the external adapter for three
hours.
"
Adapter
25

CHARGING Ni-MH BATTERIES

There are four ways to charge the Ni-MH batteries:
dynamo charging, solar charging, external adapter
charging and PC charging. The "CHARGE" light will
be on while dynamo and solar charging.
Before charging, please push the "CHARGE" switch
to"IN" position.

Dynamo Charging

You can charge the unit either in radio on mode or off
mode.
1. Push the <CHARGE> switch to "IN" position.
2.Turning the hand crank, the built-in dynamo will
start to generate electricity and charge the Ni-MH
batteries automatically.
Crank Handle
VOICE
ALERT
Z Z Z
SIREN
NOAA
AIR COUNTY
FM ALL SINGLE
AM
MULTIPLE
WB ENABLE
PM DISABLE
26