Operation - Hoover Nextra Mega Load Instruction Book

40003460.qxd 29/06/2005

Operation

Refer to the Drying guide table or the fabric labels to select
the most suitable programme.
● Open the door and load the drum with laundry. Ensure
that garments do not hinder closure of the door.
● If drying delicate items press the 'ACRYLICS/SYNTHETICS'
button to reduce the heat level. Press again on
completion, to select high temperature.
HIGH heat setting
LOW heat setting
● Turn the 'DRYING TIME' Selector until the required drying
time aligns with the dial.
● The Fast Iron programme provides a conditioning and
anti-crease function. The dryer will heat the load for 8
minutes followed by a 2 minute cool down period and is
especially good for garments which may have been left
for some time prior to ironing, in a linen basket for
example. Garments may also become stiffened when
dried outside on a washing line or inside on radiators. The
Fast Iron process relaxes the creases in the fabric making
ironing quicker and easier.
●
Gently close the door pushing it slowly until you hear the
door 'click' shut.
● Press the 'ON' button. The indicator will light and the
drying cycle begins.
● The load is dried by tumbling in thermostatically
controlled warm air. Cool air is used for the last 15
minutes to reduce creasing and cool the load ready for
handling.
●
When the program is fully completed the drum will stop
rotating and the dial will point to 0.
● Open the door and remove the load.
●
Clean the filter and empty the water container after every
drying cycle to ensure maximum dryer efficiency.
● Clean the condenser after approximately every 10 drying
cycles to ensure maximum dryer efficiency.
17:01 Page 15
WARNING!
The drum, door and
load may be very hot.
15