System Setting; Settings; Adjust The Setup Settings; [Language] Menu - LG DVX690 Owner's Manual

System Setting

12 System Setting

Settings

When the unit is turned-on at the first time, you
have to select the desired language.

Adjust the Setup Settings

You can change the settings of the unit in the
[Setup] menu.
1. Press SETUP.
2. Use w/s to select the first setup option, and
press d to move to the second level.
3. Use w/s to select a second setup option, and
press d to move to the third level.
3
4. Use w/s to select a desired setting, and press
ENTER (b) to confirm your selection.

[LANGUAGE] Menu

Menu Language

Select a language for the Setup menu and on-
screen display.
Disc Audio/Disc Subtitle/Disc Menu
Select a language for the Disc Audio/Subtitle/
Menu.
[Original]: Refers to the original language in
which the disc was recorded.
[Other]: To select another language, press
number buttons then ENTER (b) to enter the
corresponding 4-digit number according to
the language code list. (See page 20) If you
make a mistake while entering number, press
CLEAR to delete numbers then correct it.
[Off] (for Disc Subtitle): Turn off Subtitle.

[DISPLAY] Menu

TV Aspect
Select which screen aspect to use based on the
shape of your TV screen.
[4:3]: Select when a standard 4:3 TV is
connected.
[16:9]: Select when a 16:9 wide TV is
connected.

Display Mode

If you selected 4:3, you'll need to define how you
would like widescreen programs and films to be
displayed on your TV screen.
[Letterbox]: This displays a widescreen picture
with black bands at the top and bottom of the
screen.
[Panscan]: This fills the entire 4:3 screen,
cropping the picture as necessary.

Progressive Scan

(For Component Video connection)
Selects whether the COMPONENT/PROGRESSIVE
SCAN OUTPUT jacks output progressive signal. If
your TV accepts progressive format signals, you will
enjoy accurate color reproduction and high quality
image by selecting [On]. If your TV does not accept
progressive format signals, select [Off ].
If you set Progressive Scan to [On] in error, you
must reset the unit. First, remove the disc in the
unit. Next, press and hold STOP for five seconds.
The video output will be restored to the standard
setting, and a picture will be visible on your TV.

TV Output Select

Select an option according to the TV connection
type.
[RGB]: When your TV is connected with the TO
TV (SCART) jack.
[YPbPr]: When your TV is connected with the
COMPONENT/PROGRESSIVE SCAN OUTPUT
jacks on the unit.