Hoover HNL 642 Instruction Book page 5

40005508.qxd 05/03/2008
4. Remove the four retaining screws in the transit bar and
pull out the transit bracket.
We recommend you keep the transit bracket
and screws to protect the machine for future
The manufacturers will not be responsible
for any damage to the machine caused by
not following the instructions relating to
releasing the transit protection. The user is
responsible for all installation costs.
5. Take the base panel provided and fit the two self
adhesive strips by removing the backing paper on one
side and locating the strips on each side of the base
panel.
6. Tilt the machine forward and locate the base panel under
the front of the machine. Remove the remaining backing
paper from the self-adhesive strips and offer up the base
panel to the bottom of the cabinet.
09:49 Page 5
transit.
5