Table of Contents
Advertisement
Advanced Setup
Setting the Display Brightness
You can adjust the brightness of the display.
DIMMER
1
Press the remote controller's [DIMMER]
button repeatedly to select: dim, dimmer, or
normal brightness.
Changing radio wave intensity
If you weak radio station is frequently received during
AutoPreset/Scan, set the "Search Level" setting to
"Strong" to receive the strong radio station only. The
default setting is "Strong".
SETUP
1
Press the [SETUP] button on the remote
controller.
The setup menu appears in the display.
2
Use the Arrow [D]/[F] buttons to select
"Search Level", and then press [ENTER].
The Hardware setup menu appears in the display.
3
Use the Arrow [A]/[S] buttons to select
"Normal" or "Strong".
4
Press the [ENTER] button on the remote
controller to complete the setting.
Note:
• Press [RETURN] to return to the previous menu.
Advanced Setup Menu
Auto Standby
When "ASb" is set to "On", the tuner will automatically
enter Standby mode if there is no operation for 30
minutes with no radio station received.
"ASb" will appear on the display 30 seconds before the
Auto Standby comes on.
Default setting: On
Notes:
• With some sources, the Auto Standby function may
activate itself during playback.
SETUP
,
,
,
,
ENTER
1
Turn on the power.
RETURN
2
Press the [SETUP] button on the remote
controller.
The setup menu appears in the display.
3
Use the arrow [D]/[F] buttons to select
"ASb," and then press [ENTER].
The Hardware setup menu appears in the display.
4
Use the arrow [A]/[S] buttons to select
"ASb On" or "ASb Off".
5
Press the [ENTER] button on the remote
controller to complete the setting.
Note:
• Press [RETURN] to return to the previous menu.
,
,
,
,
ENTER
RETURN
21
En-
Hide quick links:
Advertisement
Table of Contents
