Advertisement
4. Take the speaker off the bottom protector.
This speaker system is extremely heavy (54 kg, or 119 lbs). Be careful when
removing it from the bottom protector to prevent possible injury or damage
to the speaker set.
• In order to protect the floor upon which you are to place the speaker, cover the installation area with a thick piece of felt
or carpet when setting up the speakers.
• Use at least two people to remove the speaker from its bottom protector.
• Avoid dragging the speaker along its bottom side, as doing so can cause damage to the speakers.
5. Remove the bottom protector from the bottom lid, pull off the tape
fixing the accessory kit box, and take out the box.
Accessory kit box
n About speaker setup
For more information about proper setup, please refer to the Owner's Manual.
The Owner's Manual is located inside the Accessory Kit.
TECHNICAL AUDIO DEVICES LABORATORIES, INC.
© 2011 TECHNICAL AUDIO DEVICES LABORATORIES, INC.
All rights reserved.
http://tad-labs.com
<SRG1007-A>
Advertisement
