Advertisement
Quick Links
Read before removing your speakers from their packaging.
TAD Evolution One
TAD-E1 SPEAKER SYSTEM
Unpacking instructions
This speaker system is extremely heavy (54 kg, or 119 lbs). Be sure
to carry out unpacking and installation with at least two people.
Trying to handle too much weight can throw you off balance, causing you to fall or otherwise
incur bodily injury.
1. Cut the two packing straps on the outer carton, remove the "handle"-
shaped packing joints (seven places), and cut open the top flap.
• To remove the packing joints, hold to the lever and pull outward.
Straps
U P
U P
Tape
Top flap
Packing joints
U P
U P
2. Remove the sides of the packing container.
3. Remove the tape (six pieces in total) from the inner carton, and remove
the inner carton.
• After removing the inner box and top protection piece, remove the plastic bag and protective sheet covering the speaker.
Inner carton
7
X
Lever
U P
U P
Bottom protector
Top protector
Plastic bag
Bottom lid
Outer carton
Inner carton
Advertisement
Related Manuals for TAD TAD-E1
Summary of Contents for TAD TAD-E1
-
Page 1: Unpacking Instructions
2. Remove the sides of the packing container. Read before removing your speakers from their packaging. TAD Evolution One TAD-E1 SPEAKER SYSTEM Unpacking instructions This speaker system is extremely heavy (54 kg, or 119 lbs). Be sure to carry out unpacking and installation with at least two people. - Page 2 4. Take the speaker off the bottom protector. 5. Remove the bottom protector from the bottom lid, pull off the tape fixing the accessory kit box, and take out the box. This speaker system is extremely heavy (54 kg, or 119 lbs). Be careful when removing it from the bottom protector to prevent possible injury or damage to the speaker set.