Table of Contents
Advertisement
40.
Figure 46.
41.
Figure 47.
42.
43.
44.
Figure 46
DO NOT operate the Model G0451 without
an adequate dust collection system. This
saw creates substantial amounts of wood
dust while operating. Failure to use a dust
collection system can result in short and
long-term respiratory illness.
Required CFM at 5" Dust Port:
Required CFM at 2
Do not confuse this CFM recommendation with
the rating of the dust collector. To determine the
CFM at the dust port, you must consider these
variables: (1) CFM rating of the dust collector,
(2) hose type and length between the dust col-
lector and the machine, (3) number of branches
or wyes, and (4) amount of other open lines
Figure 47
throughout the system. Explaining how to calcu-
late these variables is beyond the scope of this
manual. Consult an expert or purchase a good
dust collection "how-to" book.
45.
1
⁄
" Dust Port:
2
Figure 48
Figure 48.
625 CFM
150 CFM
Advertisement
Table of Contents
