Installation - LG Refrigerator Owner's Manual

3828JD8498C(OM)¿ "» 2~9 02.9.23:47PM ˘ ` 3
THIS REFRIGERATOR IS MANUFACTURED WITH GREAT CARE, AND UTILIZES THE
LATEST IN TECHNOLOGY.
WE ARE CONFIDENT THAT YOU WILL BE FULLY SATISFIED WITH IT'S PERFORMANCE
AND RELIABILITY.
BEFORE YOU START YOUR REFRIGERATOR, PLEASE READ THIS BOOKLET CAREFULLY.
IT PROVIDES EXACT INSTRUCTIONS FOR INSTALLATION, OPERATION AND
MAINTENANCE, AND ALSO SUPPLIES SOME USEFUL HINTS.

INSTALLATION

1. Select a good location.
Place your refrigerator where it is easy to use.
2. Avoid placing the unit near heat sources, direct
sunlight or moisture.
3. To ensure proper air circulation around the
fridge-freezer, please maintain sufficient space
on both the sides as well as top and maintain at
least 2 inches (5 cm) from the rear wall.
4. To avoid vibrations, the unit must be level.
If required, adjust the leveling screw to
compensate for unevenness of the floor.
The front should be slightly higher than the rear
to aid in door closing.
Leveling screw can be turned easily by tipping
the cabinet slightly.
Turn the leveling screw clockwise to raise the
unit, counterclockwise to lower it.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it means
the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from
the municipal waste stream via designated collection facilities appointed by
the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative
consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please
contact your city office, waste disposal service or the shop where you
purchased the product.
3
5. Install this appliance between 10°C and 43°C.
If the temperature around the appliance is too
low or high, cooling ability may lessen.
6. Clean your refrigerator thoroughly and wipe off
all dust accumulated during shipping.
7. Install accessories such as ice tray, shelf, etc.,
in their proper places.They are packed together
to prevent possible damage during shipment.
8. Connect the power supply cord (or plug) to the
outlet. Don't double up with other appliances on
the same outlet.
9. Prior to use, leave your refrigerator on for 2 or 3
hours.
Check the flow of cold air on the evaporator to
ensure proper cooling.
Your refrigerator is now ready for use.