La Crosse Technology Weather Station Instruction Manual page 35

3. To reset the minimum and maximum temperature and humidity data, and the times at which they were recorded,
press the SET key continuously for about 3 seconds. This will reset the MIN/MAX data recorded to the current
time, date, temperature and humidity. The current time taken is the normal displayed time and does not regard
the time zone set for the unit.
Note: the MIN/MAX data for each transmitter needs to be reset separately.
TEMPERATURE TRANSMITTER:
Outdoor
temperature
The LCD display shows the current temperature and
humidity is measured and transmitted to the Weather Station approximately every
The range of the Temperature Transmitter may be affected by the temperature and humidity. At cold temperatures the
transmitting distance may be decreased. Please bear this in mind when positioning the transmitter. The LCD contrast
on the unit will also be reduced when the batteries are reduced in power.
humidity at the location of the transmitter. The temperature and
4 seconds.
53