Song Recording Data - Casio CTK-3400SK User Manual

7.
Press bn (RECORDER) twice to exit the
recorder mode.
Disappears
• The flashing on the screen shown in step 2 becomes
faster when remaining recorder memory capacity
becomes less than 100 notes.
• Total recorder memory capacity is approximately 2,000
notes. Recording will stop automatically when there is
no more unused recorder memory remaining.
bn
• Each press of cycles through the settings shown
below. You can listen to the recorded data as many
times as you like by pressing
standby.
Recorder Off
■ To delete recorded data
After step 1 of the above procedure, do hold down
(without pressing any keyboard key) until the message
"SongDel?" appears on the display. Press [+] (YES) to delete
the data, or [–] (NO) to cancel the delete operation.
• Turning off the Digital Keyboard while recording is in
progress will cause any data in recorder memory to be
deleted.
• A new recording replaces (deletes) previously recorded
contents.
bl
while in playback
Playback
Record Standby
Standby
bn
Recording Your Keyboard Play

Song Recording Data

In addition to what you play on the keyboard, the following
information also is recorded.
Settings:
Tone number, rhythm number, tempo, reverb, chords,
layer/split settings, Pitch Bend Range setting
Operations:
Pedal, INTRO button, SYNCHRO/ENDING button,
NORMAL/FILL-IN button, VAR./FILL-IN button, TOUCH
button, PITCH BEND wheel
EN-23