Boss Audio Systems P126DVC User Manual

Phantom series

Enlarged version

Technical Support

Congratulations on your purchase of the Boss Audio Phantom Series

If you need technical support with your Boss Audio product or have

Subwoofer. Boss Audio takes great pride in producing products that

questions about its use, please contact us:

look great, sound great, and stand up to the daily rigors applied by

805.751.4853

audio enthusiasts around the world.

www.BossAudio.com

Due to ongoing product development, specifications are subject to change without notice.

P126DVC_1114_v2

Table of Contents

Need help?

Do you have a question about the P126DVC and is the answer not in the manual?

Page 1 Technical Support Congratulations on your purchase of the Boss Audio Phantom Series If you need technical support with your Boss Audio product or have Subwoofer. Boss Audio takes great pride in producing products that questions about its use, please contact us: look great, sound great, and stand up to the daily rigors applied by 805.751.4853 audio enthusiasts around the world.
Page 2 Enclosures The P126DVC will operate in a sealed or ported enclosure. Since the woofer has pole-vent, it needs a minimum clearance from the rear wall of the enclosure of 0.75” (19 mm). Below you will find the dimensions to make the enclosure to suit the subwoofers needs, it has been designed for maximum output while retaining great sound quality.
Page 3 Wiring your Subwoofer Product Specifications Impedance Dual 4 Ω Parallel Series Resonant Frequency 31 Hz 0.517 4.99 0.577 2.472 ft³ (69.9 liters) Xmax 8 mm Sensitivity (1 W/ 1 m) 84 dB Peak Power Handling 2300 W 2 Ω 8 Ω Mounting Depth 6-3/4”...