Table of Contents
Advertisement
Attach the back
panel
Attach the piano
10
Setting up the Instrument
Connect the pedal
cable, and fasten it.
C H E C K A F T E R A S S E M B L Y
■ Are any parts left over? : If any parts are left over, check the diagrams to see where they
■ Are any of the assembly screws loose? : Make sure that all screws are tight.
Cautions
Caution when moving
Take the piano off the stand, and transport the stand and piano separately. After moving them
refer to this manual, and re-assemble the stand and piano.
Loosened screws
After the stand and piano are assembled, the screws of the stand may become loose after
extended use, causing the stand to wobble. If this occurs, re-tighten each of the screws in the
stand.
Disassembly
To remove the piano and disassemble the stand, reverse the order of assembly.
After desassembly, store all parts such as the screws so that they will not be lost.
should be used.
Setting up the Instrument
11
Advertisement
Table of Contents
