Advertisement

Kingrex UPower User Guide

Features of U Power:

1. A charge/discharge toggle switch that fully separates the charging and discharging
circuits. This prevents any external noise interference from the AC charger or wall
outlet when it is used for discharging as well as ensuring a pure and interference free
DC output.
2. A constant current source based charging circuit that ensures the charging current is
within the acceptable level for the battery for a significantly extended battery life.
3. Independent charging/discharging protection circuit board on the of battery cell to
protect each cell of the battery against damage caused by over charging and
discharging. Short circuit protection is included.
4. Independent charging and discharging indicators for a clear display of the status of your
UPOWER: charging, charging completed, in use, and power low (lower than 10% of
total capacity).
5. A robust and stylish aluminum casing that not only protects the internal PCB and battery
cells but also has an excellent cooling function.
6. Uses the industry leading Sanyo 18650 Lithium-ion cells with up to 2600 maH capacity
and a lifetime of 500 charging cycles.
7. Two outputs of different voltage. One of 7.5V for Kingrex series devices and the other of
5V with a USB connector for any mobile device with a USB charging port including:
mobile phones, MP3 players, earphoneamp, PDAs and the like.

Safety precautions:

1. DO NOT disassemble, repair or modify the circuit of your UPower. In case of any
system failure or usage problem, please contact the dealer where you bought your
UPower for any service that might be needed.
2. DO NOT keep your UPower in a damp place or touch the charger with wet hands to
avoid the risk of electric shock.
3. Please use your UPower in a place with good ventilation as it needs to be cooled
through the outer casing when charging and discharging. DO NOT place any object on
top of your UPower.
4. Please charge your UPower with the attached 7.5V DC charger. DO NOT use any other
charger. This could damage the UPower.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UPower and is the answer not in the manual?

Questions and answers

Summary of Contents for Kingrex UPower

  • Page 1: Safety Precautions

    UPower for any service that might be needed. 2. DO NOT keep your UPower in a damp place or touch the charger with wet hands to avoid the risk of electric shock.
  • Page 2 List of items in package: 1. UPower 2. DC OUT cable 3. Charger...
  • Page 3 CHARGING: The charging indicator turns blue when charging and turns off when the battery is fully charged. DC OUT: The output indicator. This turns green when your UPower is in either 7.5V or 5V output mode. The light will flash when the battery capacity drops below 10%...
  • Page 4: Specifications

    DC OUT position and you are ready to use the pure DC current from your UPower. The 7.5V output is for Kingrex UC192 and UD 384 series products or any other device that requires DC 7.5V supply.
  • Page 5 Your UPower differs from most USB power supplies on the market with its clean DC current provided exclusively by battery cells. In order to achieve compact size and high capacity many other providers of power supplies use two 3.7v/2500ma battery cells in parallel that...
  • Page 6 Your device provides the so-called “audio grade” pure DC current. The waveform of UPower at 5V/500ma output is a pure clean DC current as shown on the oscilloscope screen. The waveform of other mobile power supplies at 5V/500ma output, as shown on the...

Table of Contents